GAS STATION CANNISTERS

Posted by Michael Ireland on November 22, 2006, 6:41 am

Please log in for more thread options

Dear Sir,

We use Microsoft RMS in a Gas Station C Store Environment. We have 3 Gas
Stations. RMS Interfaces with a Gas Pump
Controller called a Doms BOX and there are Buttons on the RMS Grid to stop
and start Pumps. See www.doms.com

I find some of the Existing Shift reports on the RMS Side of things lacking.

In Particular.

In one Gas Station we have 3 RMS Lanes and we are open 24 hours a day. 3
Shits per day.

We therefore have 9 separate operators during a 24 hour shift.

Traditionally with previous EPOS Machines we had better control of the
tracking of Money Variances "Over's and Shorts" per operator per shift.

In Particular where in the RMS EPOS Software can an shop operator account
for the canisters that he drops to a safe during his shift to unload money
from his EPOS.

Traditionally on other epos there was a canister drop function where an
operator would remove say 500 Euros from the EPOS Insert it into
a numbered canister and then tell the epos that he was doing this. The EPOS
Would ask him to declare the Amount inserted and the Canister Number.

It would then print a Thermal Date and name Stamped Receipt Slip and he
would insert this into the canister close it and drop it into the safe chute.

At the End of his shift on the Shift Z Report thermal printout there would
be a section which List of all the canisters that he dropped with the amounts
dropped and the times.

Each Operator would drop 6 to 10 Canisters during each 8 hour shift.

Can you Help.

kind regards,

Michael McLoughlin.
_____________________
JH McLoughlin & Co Ltd
Ballymany,
Newbridge
Co Kildare
Ireland.

Tel 00353 45 447298.
Fax 00353 45 431244.

www.jhmcloughlin.com