|
Posted by Gill on August 21, 2007, 4:12 pm
Please log in for more thread options
1. check opos device name (lc-pc) and Makesure you have same opos device
name under the register list.
2. If you still get error 941 go to My computar/property/hardware/device
manger/ Under the com & port verify the com number for LC-PCand makesure You
are using same com on opos. then check other serial port devices like pin
pad, touch sceen ect. Makesure You are not using same com number for other
devices.
Com1 for lc-pc, com2 pin pad, com3 touch screen.
--
Thank You
Harjit SherGill /DBA
Altaville Market
324 South Main st po box 370
Altaville CA 95221
Tel : 209-729-1403
vendaliajat@yahoo.com
>I have Logic Contraol Poll Display (LD9900) with serial Port. I am using
> OPOS Driver and it is pass through very well. I am seeing LCD Test and
> did
> test from command prompt and it is working fine. When I am opeing POS it
> give me error # 941 - "Poll Dispaly OPOS Driver is missing - you want to
> continunu - Yes or No" - I am using RMS Ver 2.0 with service pack 1. I
> have
> 5 registers and I am getting problem in 4th register. Same display works
> fine in other register.
>
> Need help.
>
> Chirag Thakkar
> NetLink Consulting, Inc.
> 732 548-6300
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap