|
Posted by Robert on September 24, 2007, 1:06 am
Please log in for more thread options By real time i mean that it shows up the on the main screen as you type in
the tendered amount the change amount changes accordingly.
This should not be this hard, it works on the main screen , we would this
not work on the Net display /.
Is there any documentation for the configuration of the net display ?
I know there is a way to display it after you press enter to end the
transaction but this does not work in our real life.
Since we process a lot of transactions in short time we are used to just hit
enter few tines to close the screens.
We also have it set to automatically close to save on the number of times we
have to hit enter.
>
> You understand that "real time" is the amount of time before you hit the enter
key, right. After that, the screen has updated for the next transaction, unless
you turn on the Automatically close...
>
> --
>
> Jeff
> Check Point Software
>
> =====================================================
>
> You must be using Outlook Express/Windows Mail or some other type of newsgroup
reader to
> see and download the file attachment(s). If you are not using a reader, follow
> the link below to setup Outlook Express. Click on "Open with newsreader"
> under the MS Retail Management System on the right.
>
> http://tinyurl.com/75bgz
> =====================================================
>
>
> Do you still need the file ?
>
> Ware you able to get it to work in "real time "
>
>
> Robert
>
> "Craig" wrote:
>
> > Here it is.
> > Craig
> >
> > > Jeff,
> > > I am attempting to add these fields also and found this post but outlook
> > > express will not allow me to download any message older then about 30
> > > days.
> > > I have already turned off the 300 message limit in Express but still no
> > > luck.
> > > I assume that I need to use one of the QS bridge transaction properties
> > > but
> > > a copy of the attachment you posted would be very helpful as I have yet
> > > not
> > > been able to get it to work. I have the labels and all, just need the
> > > data
> > > to flow through to the net display. You can repost here or email to
brad
> > > at
> > > bluhorse.com. If anyone else has input, it would be greatly appreciated.
> > >
> > > Brad
> > >
> > > "Jeff @ Check Point Software" wrote:
> > >
> > >> Robert,
> > >>
> > >> You need to set the program to not close the change screen so that it
> > >> updates the Net display.
> > >>
> > >> Manager | File | Configuration | Options | POS options | uncheck
> > >> Automatically close change screen
> > >>
> > >> --
> > >>
> > >> Jeff
> > >> Check Point Software
> > >>
> > >> =====================================================
> > >>
> > >> You must be using Outlook Express/Windows Mail or some other type of
> > >> newsgroup reader to
> > >> see and download the file attachment(s). If you are not using a reader,
> > >> follow
> > >> the link below to setup Outlook Express. Click on "Open with
newsreader"
> > >> under the MS Retail Management System on the right.
> > >>
> > >> http://tinyurl.com/75bgz
> > >> =====================================================
> > >>
> > >>
> > >>
> > >> Thank for the file.
> > >> Now it shows the tendered but does not show the Change, it always
> > >> shows
> > >> 0.00
> > >>
> > >>
> > >> Any idea what might be wrong ?
> > >>
> > >>
> > >> "Jeff @ Check Point Software" wrote:
> > >>
> > >> > Robert,
> > >> >
> > >> > Try this one.
> > >> >
> > >> > --
> > >> >
> > >> > Jeff
> > >> > Check Point Software
> > >> >
> > >> > =====================================================
> > >> >
> > >> > You must be using Outlook Express/Windows Mail or some other type of
> > >> > newsgroup reader to
> > >> > see and download the file attachment(s). If you are not using a
> > >> reader,
> > >> > follow
> > >> > the link below to setup Outlook Express. Click on "Open with
> > >> newsreader"
> > >> > under the MS Retail Management System on the right.
> > >> >
> > >> > http://tinyurl.com/75bgz
> > >> > =====================================================
> > >> >
> > >> > How can i display Tendered and Change values on the Net Display .
> > >> > I found a way to show the Tendered and Change fields but they do
> > >> not
> > >> > show
> > >> > any values once those are entered on the register screen
> > >> > Thanks
> > >> > Robert
> > >> >
> > >>
> >
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap