|
Posted by hitmanú™©ÝŠÇ.²È¨žÉ¢rº,¡û\¢ on August 12, 2005, 10:36 am
Please log in for more thread options the port is actually set to ESDPRT001 ... maybe this is a problem. I'll try
and change it to epp or ecp and see if this improves things...
thanx
R.
"josh" wrote:
> never tried that setup before with the dongle and the printer on the same
> port. Maybe problem there. The only other problem I have had with lpt
> printers is to make sure that in bios the lpt is set to epp/ecp or just epp.
> Maybe try adding a lpt2 pci card and run the printer off that.
>
> "hitman" wrote:
>
> > Josh -
> >
> > It's a TM-88III direct connect using LPT (hanging off the s/w dongle). I
> > checked the port configuration/spooler settings and all appears normal.
> > Printer is not being shared. Process priority is defaulting to 20.
> >
> > Thanx.
> >
> > Rich
> >
> >
> > "josh" wrote:
> >
> > > what type of connection is it ?
> > >
> > > "hitman" wrote:
> > >
> > > > Having an intermittent issue when something gets queued to the receipt
> > > > printer, the printer will seem to hang ~ still see it in the print queue
fine
> > > > (small 8k file) but no joy...however, as soon as I close Store
Operations it
> > > > prints right out. Any ideas?
> > > >
> > > > Thanx
> > > >
> > > > -=Rich=-
> > > >
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap