Terminals, no registers

Posted by Ruffpatron on October 6, 2005, 9:32 am

Please log in for more thread options

Hello...I am trying to setup the RMS on a network without a Domain and the
customer has no registers. They have two terminal locations to enter
information into the POS system, but do not use it with a register. I am
having some issues figuring out where to go to set this up. Any help would be
appreciated.
Thanks in advance.

Posted by Billy on October 7, 2005, 12:25 pm

Please log in for more thread options

I am guessing you will have RMS store operations with 2 lane (register)
license.
It will work in an workgroup network environment.
Your two terminal locations would need to be setup as register 1 and 2. You
don't have to have a register with a drawer, receipt printer, scanner etc.
Install RMS (with MSDE or SQL) on terminal 1 and setup as register 1.
Install RMS on the terminal 2 (register 2) and configure connection to
database/server.

> Hello...I am trying to setup the RMS on a network without a Domain and the

> customer has no registers. They have two terminal locations to enter

> information into the POS system, but do not use it with a register. I am

> having some issues figuring out where to go to set this up. Any help would

> be

> appreciated.

> Thanks in advance.