|
Posted by Bill on May 3, 2006, 10:28 pm
Please log in for more thread options I have looked in both the Epson FX850, MS generic Text only, and the
Panisonic 2130 properties for paper size and all just have the common 8.5x11,
A4,envelopes, fan fold 8.5x11, and such. The owner has boxes of 1x4in fan
fold tractor feed labels and gets impatient when he uses his laser printer
with labels 3 columnx11 rows of labels, espically if he his printing a few
labels and he has a partial sheet of labels to deal with. His old program
use to use the tractor feed labels and it worked fine for 1 label or
hundreds. May be I am not looking in the right place in the label designer
to make that setting. Thanks for the help.
"Glenn Adams [MVP - Retail Mgmt]" wrote:
> Most windows printer drivers allow you to add custom paper sizes, but I
> don't remember the last time I saw a tractor feed printer, so that may
> not be available in the driver. Did you set the ROWS in the label
> designer to 10 (or 11 - however many rows are on the sheet)?
>
> Glenn Adams
> Tiber Creek Consulting
> http://www.tibercreek.com
> glenn@tibercreek.com
> ----------------------------------------------
> Please DO NOT respond to me directly but post all responses here in the
> newsgroup so that all can share the information.
>
>
> Bill wrote:
> > Yes I am using a predefined Avery Label. It prints the single label just
> > fine, then page feeds 10 more inches/10 labels as if the label is 8.5x11
page
> > format. How do I tell it that the label/ page is 1" high? I set parameters
> > of the label but the printer only has 8.5x11 fanfold paper size.
> >
> >
> >
> > "Glenn Adams [MVP - Retail Mgmt]" wrote:
> >
> >> What label format are you using? If it's one of the Avery types, you
> >> may need to adjust the Label Height or the number or Rows per page in
> >> Label designer. You may also need to create a paper type in the Windows
> >> printer properties to match your Label Designer Settings.
> >>
> >> Glenn Adams
> >> Tiber Creek Consulting
> >> http://www.tibercreek.com
> >> glenn@tibercreek.com
> >> ----------------------------------------------
> >> Please DO NOT respond to me directly but post all responses here in the
> >> newsgroup so that all can share the information.
> >>
> >>
> >> Bill wrote:
> >>> I load a generic text driver or WinXP drivers for an Epson or Panasonic
> >>> tractor fed printer and get a propperly printed label, but then it does a
> >>> form feed. The printer stops with 1 printed label and 9 blank labels.
How
> >>> do i control the form feed after printing??
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap