credit card slip

Posted by juzar on July 28, 2006, 11:08 pm

Please log in for more thread options

Is there any way to have the printer cut the receipt between the two receipts.
Right now it prints two receipt together and then cuts at the end. Then I
have to tear my copy and give the other to the customer.
Sometime it tears very bad and have to use tape. It doesn't look good.
Any suggestions.
Thanks

Posted by Vince on July 29, 2006, 12:06 am

Please log in for more thread options

What type of printer are you using? Usually this can be configured, my
printer an epson tr88iii cuts the paper both times. Not sure if it's your
printer, or the config?
--
Thank You
Vince :)

"juzar" wrote:

> Is there any way to have the printer cut the receipt between the two receipts.

> Right now it prints two receipt together and then cuts at the end. Then I

> have to tear my copy and give the other to the customer.

> Sometime it tears very bad and have to use tape. It doesn't look good.

> Any suggestions.

> Thanks

Posted by juzar on July 29, 2006, 6:39 pm

Please log in for more thread options

I have Ithaca(epson mode) series 80 printer using windows driver.

"Vince" wrote:

> What type of printer are you using? Usually this can be configured, my

> printer an epson tr88iii cuts the paper both times. Not sure if it's your

> printer, or the config?

> --

> Thank You

> Vince :)

> "juzar" wrote:

> > Is there any way to have the printer cut the receipt between the two receipts.

> > Right now it prints two receipt together and then cuts at the end. Then I

> > have to tear my copy and give the other to the customer.

> > Sometime it tears very bad and have to use tape. It doesn't look good.

> > Any suggestions.

> > Thanks

> >

Posted by Glenn Adams [MVP - Retail Mgmt on July 30, 2006, 11:08 am

Please log in for more thread options

RMS is sending both receipts as a single print job. I don't use Windows
drivers or Ithica printers, but there should be a control code that you
can add to your receipt template to tell the printer to cut the receipt
between the two. Check with your reseller, or with Ithica.

Glenn Adams
Tiber Creek Consulting
http://www.tibercreek.com
glenn@tibercreek.com
----------------------------------------------
Please DO NOT respond to me directly but post all responses here in the
newsgroup so that all can share the information.

juzar wrote:

> I have Ithaca(epson mode) series 80 printer using windows driver.

> "Vince" wrote:

>> What type of printer are you using? Usually this can be configured, my

>> printer an epson tr88iii cuts the paper both times. Not sure if it's your

>> printer, or the config?

>> --

>> Thank You

>> Vince :)

>> "juzar" wrote:

>>> Is there any way to have the printer cut the receipt between the two receipts.

>>> Right now it prints two receipt together and then cuts at the end. Then I

>>> have to tear my copy and give the other to the customer.

>>> Sometime it tears very bad and have to use tape. It doesn't look good.

>>> Any suggestions.

>>> Thanks

>>>

Posted by CP on August 21, 2006, 4:16 pm

Please log in for more thread options

Did you have any luck finding a solution? We're using the iTherm 280
and are having the same issue. Because the .xml is sending the control
codes as text, they just print on the receipt...

Thanks,
-CP

juzar wrote:

> I have Ithaca(epson mode) series 80 printer using windows driver.

> "Vince" wrote:

> > What type of printer are you using? Usually this can be configured, my

> > printer an epson tr88iii cuts the paper both times. Not sure if it's your

> > printer, or the config?

> > --

> > Thank You

> > Vince :)

> >

> > "juzar" wrote:

> >

> > > Is there any way to have the printer cut the receipt between the two receipts.

> > > Right now it prints two receipt together and then cuts at the end. Then I

> > > have to tear my copy and give the other to the customer.

> > > Sometime it tears very bad and have to use tape. It doesn't look good.

> > > Any suggestions.

> > > Thanks

> > >