|
Posted by Ken Blake on January 28, 2007, 10:34 am
Please log in for more thread options
R. C. White wrote:
> Hi, DotCom.
>
> No, I don't know what R4 fixes. But, considering the trauma that I
> reported here with trying to install R3 on my Vista Ultimate x64
> (RTM) system, I'm very happy to report that the method I finally
> found for R3 also worked very well for R4. ;<)
>
> The key was to let Quicken try to update automatically as part of One
> Step Update. Then, after it failed, I right-clicked on Command
> Prompt and clicked Run as Administrator. From there, I ran:
> C:ProgramDataIntuitQuickenInetCommonpatchUpdateqwpatch.exe
RC, having had no problem installing Quicken 2007 R3 on 32-bit Vista
Ultimate here, R4 failed yesterday with the message "Download error reading
update file." When I tried it again this morning, I got the same error, but
immediately. It obviously didn't even try to read anything first; it just
displayed the error message.
Any advice? Should I try the qwpatch.exe? Is there any risk in running it?
--
Ken Blake
Please reply to the newsgroup
>
> And it worked on the first try. ;<) Perhaps it would have worked
> without trying the OSU first, but I don't know.
>
> Many users will be getting Vista starting next Tuesday. I hope
> Intuit will have heard about it by then. :>{ But, if not, we can
> probably use this workaround until they get their act together.
>
> RC
>
>> Anybody know what this new release fixes?
>>
>> dotcom
|
|
Posted by Ken Blake on January 28, 2007, 10:37 am
Please log in for more thread options
Ken Blake wrote:
> R. C. White wrote:
>> Hi, DotCom.
>>
>> No, I don't know what R4 fixes. But, considering the trauma that I
>> reported here with trying to install R3 on my Vista Ultimate x64
>> (RTM) system, I'm very happy to report that the method I finally
>> found for R3 also worked very well for R4. ;<)
>>
>> The key was to let Quicken try to update automatically as part of One
>> Step Update. Then, after it failed, I right-clicked on Command
>> Prompt and clicked Run as Administrator. From there, I ran:
>> C:ProgramDataIntuitQuickenInetCommonpatchUpdateqwpatch.exe
>
>
> RC, having had no problem installing Quicken 2007 R3 on 32-bit Vista
> Ultimate here, R4 failed yesterday with the message "Download error
> reading update file." When I tried it again this morning, I got the
> same error, but immediately. It obviously didn't even try to read
> anything first; it just displayed the error message.
>
> Any advice? Should I try the qwpatch.exe? Is there any risk in
> running it?
By the way, I just went to the Intuit web site to try to find out what was
new or fixed in R4. According to their site R4 doesn't exist and R3 is the
latest patch.
--
Ken Blake
Please reply to the newsgroup
|
|
Posted by Debbie Becker on January 28, 2007, 11:50 am
Please log in for more thread options Ken Blake wrote:
> R. C. White wrote:
>> Hi, DotCom.
>>
>> No, I don't know what R4 fixes. But, considering the trauma that I
>> reported here with trying to install R3 on my Vista Ultimate x64
>> (RTM) system, I'm very happy to report that the method I finally
>> found for R3 also worked very well for R4. ;<)
>>
>> The key was to let Quicken try to update automatically as part of One
>> Step Update. Then, after it failed, I right-clicked on Command
>> Prompt and clicked Run as Administrator. From there, I ran:
>> C:ProgramDataIntuitQuickenInetCommonpatchUpdateqwpatch.exe
>
>
> RC, having had no problem installing Quicken 2007 R3 on 32-bit Vista
> Ultimate here, R4 failed yesterday with the message "Download error
> reading update file." When I tried it again this morning, I got the
> same error, but immediately. It obviously didn't even try to read
> anything first; it just displayed the error message.
>
> Any advice? Should I try the qwpatch.exe? Is there any risk in
> running it?
-By the way, I just went to the Intuit web site to try to find out what was
-new or fixed in R4. According to their site R4 doesn't exist and R3 is the
-latest patch.
======================
Only mention I can find is:
http://www.quickenforums.com/thread.jspa?threadID=800001208&messageID=800004
871
|
|
Posted by DotCom on January 28, 2007, 1:54 pm
Please log in for more thread options Well at least that is *some* mention of it...not much but some.
dotcom
> Ken Blake wrote:
>
>> R. C. White wrote:
>>> Hi, DotCom.
>>>
>>> No, I don't know what R4 fixes. But, considering the trauma that I
>>> reported here with trying to install R3 on my Vista Ultimate x64
>>> (RTM) system, I'm very happy to report that the method I finally
>>> found for R3 also worked very well for R4. ;<)
>>>
>>> The key was to let Quicken try to update automatically as part of One
>>> Step Update. Then, after it failed, I right-clicked on Command
>>> Prompt and clicked Run as Administrator. From there, I ran:
>>> C:ProgramDataIntuitQuickenInetCommonpatchUpdateqwpatch.exe
>>
>>
>> RC, having had no problem installing Quicken 2007 R3 on 32-bit Vista
>> Ultimate here, R4 failed yesterday with the message "Download error
>> reading update file." When I tried it again this morning, I got the
>> same error, but immediately. It obviously didn't even try to read
>> anything first; it just displayed the error message.
>>
>> Any advice? Should I try the qwpatch.exe? Is there any risk in
>> running it?
>
>
> -By the way, I just went to the Intuit web site to try to find out what
> was
> -new or fixed in R4. According to their site R4 doesn't exist and R3 is
> the
> -latest patch.
>
> ======================
> Only mention I can find is:
> http://www.quickenforums.com/thread.jspa?threadID=800001208&messageID=800004
> 871
>
>
|
|
Posted by Disciple on January 28, 2007, 2:44 pm
Please log in for more thread options On Sun, 28 Jan 2007 11:50:04 -0500, Debbie Becker wrote:
> Ken Blake wrote:
>
>> R. C. White wrote:
>>> Hi, DotCom.
>>>
>>> No, I don't know what R4 fixes. But, considering the trauma that I
>>> reported here with trying to install R3 on my Vista Ultimate x64
>>> (RTM) system, I'm very happy to report that the method I finally
>>> found for R3 also worked very well for R4. ;<)
>>>
>>> The key was to let Quicken try to update automatically as part of One
>>> Step Update. Then, after it failed, I right-clicked on Command
>>> Prompt and clicked Run as Administrator. From there, I ran:
>>> C:ProgramDataIntuitQuickenInetCommonpatchUpdateqwpatch.exe
>>
>>
>> RC, having had no problem installing Quicken 2007 R3 on 32-bit Vista
>> Ultimate here, R4 failed yesterday with the message "Download error
>> reading update file." When I tried it again this morning, I got the
>> same error, but immediately. It obviously didn't even try to read
>> anything first; it just displayed the error message.
>>
>> Any advice? Should I try the qwpatch.exe? Is there any risk in
>> running it?
>
>
> -By the way, I just went to the Intuit web site to try to find out what was
> -new or fixed in R4. According to their site R4 doesn't exist and R3 is the
> -latest patch.
>
> ======================
> Only mention I can find is:
> http://www.quickenforums.com/thread.jspa?threadID=800001208&messageID=800004
> 871
No one saw this thread by Quicken Kathryn; Quicken 2007 R4 Auto Patch Now
Available!,
http://www.quickenforums.com/thread.jspa?threadID=800001208&tstart=0&mod=1169846088020.
BTW - Debbie I could not find the thread you referenced, It wrapped in my
newsreader and I could not straighten it out so it would work. :(
--
Disciple - Team Z
"... For the things which are seen are temporary, but the things which are
not seen are eternal." 2 Cor. 4:18
|
| Similar Threads | Posted | | Vista upgrade - Was Re: Q2007 release 4 update? | January 28, 2007, 7:44 am |
| With Q2007, I can't update my Bank of America accounts with either WebConnect or One Step Update anymore! | November 17, 2006, 11:11 am |
| Quicken 2007 Update to Release 5 | May 9, 2007, 9:31 pm |
| Q2007 R2 Update problems | October 11, 2006, 6:37 pm |
| ING Direct and one-step-update in Q2007 | September 15, 2006, 10:53 am |
| Q2007 Acct Update Problem | June 7, 2007, 8:06 pm |
| Q2007 r5 update broke attachments | October 1, 2007, 10:24 am |
| Q2007 r5 update broke Attachments | October 2, 2007, 6:13 pm |
| Q2007 Update/Send Quicken Bill Pay Not Working | November 18, 2006, 11:47 am |
| QD Release 6 Out | January 9, 2008, 9:53 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap