<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
<channel>
<title>Point-Of-Sale Software</title>
<atom:link href="http://www.rockryno.com/rss/microsoft.public.pos.xml" rel="self" type="application/rss+xml" />
<link>http://www.rockryno.com/point-of-sale/1.htm</link>
<description>&#45; MS Point Of Sale software discussed here</description>
<language>en-us</language>
<pubDate>Sat, 07 Nov 2009 10:30:03 -0500</pubDate>
<webMaster>info@rockryno.com (Rockryno.com)</webMaster>
<generator>http://www.rockryno.com/</generator>
<docs>http://blogs.law.harvard.edu/tech/rss/</docs>
<item>
<title>How do I know which register a lane is attached to&#63;</title>
<link>http://www.rockryno.com/point-of-sale/How-do-I-know-which-register-a-lane-is-attached-to-39536-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/How-do-I-know-which-register-a-lane-is-attached-to-39536-.htm</guid>
<description><![CDATA[ Where in RMS is the register number assigned. Can it be changes?  We have six lanes and have had to rebuild one. In the register list how do I  assign the register nunber?The post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/How-do-I-know-which-register-a-lane-is-attached-to-39536-.htm">Start the discussion here</a> ]]></description>
<pubDate>Fri, 06 Nov 2009 20:01:01 -0500</pubDate>
</item>
<item>
<title>More griping about P.O.s in RMS 2.0</title>
<link>http://www.rockryno.com/point-of-sale/More-griping-about-P-O-s-in-RMS-2-0-39527-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/More-griping-about-P-O-s-in-RMS-2-0-39527-.htm</guid>
<description><![CDATA[ I recently upgraded to 2.0 and I cannot believe how HORRIBLE the new P.O. Add Items window is. Did anyone at MS actually test it before they added it to 2.0? It works fine for a vendor with only a few items, but otherwise, it's a nightmare. Sometime...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/More-griping-about-P-O-s-in-RMS-2-0-39527-.htm">discuss here</a> ]]></description>
<pubDate>Fri, 06 Nov 2009 09:00:17 -0500</pubDate>
</item>
<item>
<title>HOW CAN I MAKE ALL ITEM ON SALE</title>
<link>http://www.rockryno.com/point-of-sale/HOW-CAN-I-MAKE-ALL-ITEM-ON-SALE-39526-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/HOW-CAN-I-MAKE-ALL-ITEM-ON-SALE-39526-.htm</guid>
<description><![CDATA[  I WANT TO PUT 10% OFF ON ALL ITEMS, BUT I WANT TO DO IT ONLY FOR 3 DAYS AND  GO BACK REG PRICE. HOW CAN I DO THAT.... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/HOW-CAN-I-MAKE-ALL-ITEM-ON-SALE-39526-.htm">discuss here</a> ]]></description>
<pubDate>Fri, 06 Nov 2009 08:41:01 -0500</pubDate>
</item>
<item>
<title>adjusting scale weight</title>
<link>http://www.rockryno.com/point-of-sale/adjusting-scale-weight-39522-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/adjusting-scale-weight-39522-.htm</guid>
<description><![CDATA[ How can adjust my scale to -0.02, it a metrologic scale. Isee lot of daily  product such as cold cuts, cole salad etc. is there any way I can adjust to  -0.02 on Microsoft RMS. Does anybody know.... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/adjusting-scale-weight-39522-.htm">discuss here</a> ]]></description>
<pubDate>Thu, 05 Nov 2009 19:51:03 -0500</pubDate>
</item>
<item>
<title>SOPOUSER.exe process spiking CPU</title>
<link>http://www.rockryno.com/point-of-sale/SOPOUSER-exe-process-spiking-CPU-39513-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/SOPOUSER-exe-process-spiking-CPU-39513-.htm</guid>
<description><![CDATA[ When we click the secure button in RMS 2.0 the CPU usage is at 99% from the  process SOPOUSER.exe.  I have narrowed this down to the cash drawer, when i  disable the cash drawer in Manager, then click the secure button the  SOPOUSER.exe process is a...The post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/SOPOUSER-exe-process-spiking-CPU-39513-.htm">Start the discussion here</a> ]]></description>
<pubDate>Thu, 05 Nov 2009 11:05:01 -0500</pubDate>
</item>
<item>
<title>Credit Card Processors</title>
<link>http://www.rockryno.com/point-of-sale/Credit-Card-Processors-39510-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Credit-Card-Processors-39510-.htm</guid>
<description><![CDATA[ I would like to know if anyone has experience with Credit and Debit (interac) processing in Canada. We would like to have it fully integrated with RMS (does ICVerify or PC-Charge work in Canada?). We would also prefer an ingenico pinpad, but this is...... The post has 6 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Credit-Card-Processors-39510-.htm">discuss here</a> ]]></description>
<pubDate>Wed, 04 Nov 2009 20:53:23 -0500</pubDate>
</item>
<item>
<title>04 Hosting Web www.ivys.es</title>
<link>http://www.rockryno.com/point-of-sale/04-Hosting-Web-www-ivys-es-39504-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/04-Hosting-Web-www-ivys-es-39504-.htm</guid>
<description><![CDATA[ Hosting Web www.Ivys.es Hosting Web www.Ivys.es Hosting Web www.Ivys.es Hosting Web www.Ivys.es Hosting Web www.Ivys.es Hosting Web www.Ivys.es Hosting Web www.Ivys.es Hosting Web www.Ivys.es Hosting Linux Web www.ivys.es Hosting Linux Web www.ivys....The post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/04-Hosting-Web-www-ivys-es-39504-.htm">Start the discussion here</a> ]]></description>
<pubDate>Wed, 04 Nov 2009 07:18:31 -0500</pubDate>
</item>
<item>
<title>Ingenico i6550 stand by screen</title>
<link>http://www.rockryno.com/point-of-sale/Ingenico-i6550-stand-by-screen-39500-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Ingenico-i6550-stand-by-screen-39500-.htm</guid>
<description><![CDATA[ I managed to install the Ingenico 6550 pin pad on RMS v 2.0.126 (SP 3), the  PINPAD is working, the MSR is working, the Signature capture form is working.  My problem is while the PINPAD is on standby mode the screen is blank, i mean  when the POS i...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Ingenico-i6550-stand-by-screen-39500-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 03 Nov 2009 18:54:01 -0500</pubDate>
</item>
<item>
<title>Epson TMIIV &#45; help</title>
<link>http://www.rockryno.com/point-of-sale/Epson-TMIIV-help-39499-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Epson-TMIIV-help-39499-.htm</guid>
<description><![CDATA[ Just go a new Dell Vostro 220S but it has no parallel port and my Epson  TMIIV is parallel port driven? Anybody have any suggestion as to what low  profile PCI parallel port card I could buy to make this work or should I  change the Epson adaptor to...... The post has 4 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Epson-TMIIV-help-39499-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 03 Nov 2009 17:52:46 -0500</pubDate>
</item>
<item>
<title>RMS 2.0 Credit Cart Processing</title>
<link>http://www.rockryno.com/point-of-sale/RMS-2-0-Credit-Cart-Processing-39498-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/RMS-2-0-Credit-Cart-Processing-39498-.htm</guid>
<description><![CDATA[ Hello, I am looking to set up a new register with RMS 2.0 at a new location.  I am  currently using RMS 2.0 with Citi as my credit card processor but am looking  for more processing options that can be integrated with RMS 2.0 without  having to inst...... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/RMS-2-0-Credit-Cart-Processing-39498-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 03 Nov 2009 17:20:02 -0500</pubDate>
</item>
<item>
<title>Blackbaud&#47;Raisers Edge</title>
<link>http://www.rockryno.com/point-of-sale/Blackbaud-Raiser-s-Edge-39497-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Blackbaud-Raiser-s-Edge-39497-.htm</guid>
<description><![CDATA[ Is anyone familiar with RMS being able to integrate to Blackbaud/Raiser's  Edge? This module provides ticketing and auctioning functionality.... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Blackbaud-Raiser-s-Edge-39497-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 03 Nov 2009 17:02:06 -0500</pubDate>
</item>
<item>
<title>Purchase order modification</title>
<link>http://www.rockryno.com/point-of-sale/Purchase-order-modification-39491-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Purchase-order-modification-39491-.htm</guid>
<description><![CDATA[ hello, Is it possible to print on an Open Purchase Order to show the present  On hand quantity together with the selling price and then the total available  quantity on the received PO (after the PO is received).... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Purchase-order-modification-39491-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 03 Nov 2009 14:40:02 -0500</pubDate>
</item>
<item>
<title>Purchase Orders and Quickbooks</title>
<link>http://www.rockryno.com/point-of-sale/Purchase-Orders-and-Quickbooks-39490-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Purchase-Orders-and-Quickbooks-39490-.htm</guid>
<description><![CDATA[ Hi All, I'm having problems with integrating RMS with Quickbooks. I can't figure out  how I send my (closed) Purchase Orders to Quickbooks with my GL account  setup. I understand that the PO's will be posted to Quickbooks as bills to  pay.  Any sugg...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Purchase-Orders-and-Quickbooks-39490-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 03 Nov 2009 12:10:07 -0500</pubDate>
</item>
<item>
<title>Acceptable barcode formats for Microsoft RMS</title>
<link>http://www.rockryno.com/point-of-sale/Acceptable-barcode-formats-for-Microsoft-RMS-39489-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Acceptable-barcode-formats-for-Microsoft-RMS-39489-.htm</guid>
<description><![CDATA[ Does anyone know where I can find a list of bar code formats accepted by the  Microsoft RMS software?  ... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Acceptable-barcode-formats-for-Microsoft-RMS-39489-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 03 Nov 2009 10:40:01 -0500</pubDate>
</item>
<item>
<title>Add more column in existing report</title>
<link>http://www.rockryno.com/point-of-sale/Add-more-column-in-existing-report-39488-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Add-more-column-in-existing-report-39488-.htm</guid>
<description><![CDATA[ Hello Everyone. Is there anyway to add more column from database table into existing report? Which tool do I have to use to modify RMS report? Please be advised. thank you very much in advance.... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Add-more-column-in-existing-report-39488-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 03 Nov 2009 09:47:18 -0500</pubDate>
</item>
<item>
<title>Reference field on account receivables says &#40;Pending&#41;</title>
<link>http://www.rockryno.com/point-of-sale/Reference-field-on-account-receivables-says-Pending-39487-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Reference-field-on-account-receivables-says-Pending-39487-.htm</guid>
<description><![CDATA[ I have a problem on one of our client's environments. In HQ Manager when  viewing customer account information and then clicking on receivable to view  the account receivables, only one or two receivables are shown. The reference  field does not sho...The post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/Reference-field-on-account-receivables-says-Pending-39487-.htm">Start the discussion here</a> ]]></description>
<pubDate>Tue, 03 Nov 2009 08:30:01 -0500</pubDate>
</item>
<item>
<title>Previously Closed Bills in Quickbooks Reappear during RMS Ba...</title>
<link>http://www.rockryno.com/point-of-sale/Previously-Closed-Bills-in-Quickbooks-Reappear-during-RMS-Ba-39485-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Previously-Closed-Bills-in-Quickbooks-Reappear-during-RMS-Ba-39485-.htm</guid>
<description><![CDATA[ I am seeing previously posted and closed bills in Quickbooks Premier 2008  reappear during later posts of new batches from RMS. Anybody seen this one? Thanks, RichardThe post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/Previously-Closed-Bills-in-Quickbooks-Reappear-during-RMS-Ba-39485-.htm">Start the discussion here</a> ]]></description>
<pubDate>Mon, 02 Nov 2009 18:17:01 -0500</pubDate>
</item>
<item>
<title>worksheets slow to be recognized by client</title>
<link>http://www.rockryno.com/point-of-sale/worksheets-slow-to-be-recognized-by-client-39477-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/worksheets-slow-to-be-recognized-by-client-39477-.htm</guid>
<description><![CDATA[ recently i have been having problems with some of the store clients not  seeing a worksheet just after its created.  sometimes I have to wait as long  as 6 or 8 minutes for the client to see and run the worksheet.  any thoughts  ?  it has been runni...... The post has 3 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/worksheets-slow-to-be-recognized-by-client-39477-.htm">discuss here</a> ]]></description>
<pubDate>Mon, 02 Nov 2009 17:02:01 -0500</pubDate>
</item>
<item>
<title>Duplicate Worksheets created</title>
<link>http://www.rockryno.com/point-of-sale/Duplicate-Worksheets-created-39466-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Duplicate-Worksheets-created-39466-.htm</guid>
<description><![CDATA[ Hi There I have an issue withone of the databases.  In HQ Manager when I try to  create any worksheet and approve it the manager will create two fo the same  kind.  One approved and one new (not Approved).   When I open either  worksheet I find that...... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Duplicate-Worksheets-created-39466-.htm">discuss here</a> ]]></description>
<pubDate>Sun, 01 Nov 2009 22:07:01 -0500</pubDate>
</item>
<item>
<title>RMS 2.0 SO Manager abends after installation on Win 7 Profes...</title>
<link>http://www.rockryno.com/point-of-sale/RMS-2-0-SO-Manager-abends-after-installation-on-Win-7-Profes-39465-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/RMS-2-0-SO-Manager-abends-after-installation-on-Win-7-Profes-39465-.htm</guid>
<description><![CDATA[ I just installed Win7 Pro on a new disk. I insalled RMS SO 2.0 with SP 2  then 3, then I loaded SP for the SQL server 2005 Express. I can connect to the database with administrator but neither manager nor pos  starts. I get the following popup (it's...... The post has 9 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/RMS-2-0-SO-Manager-abends-after-installation-on-Win-7-Profes-39465-.htm">discuss here</a> ]]></description>
<pubDate>Sun, 01 Nov 2009 20:21:35 -0500</pubDate>
</item>
<item>
<title>Jewelry Label&#45;POS 2009</title>
<link>http://www.rockryno.com/point-of-sale/Jewelry-Label-POS-2009-39463-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Jewelry-Label-POS-2009-39463-.htm</guid>
<description><![CDATA[ I need to print 2-up jewelry barbell type labels in MS POS 2009.  There is no template for it.  Is there a place to download templates that work in POS 2009? If there is no place to download a template, would anyone know how to create that label typ...... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Jewelry-Label-POS-2009-39463-.htm">discuss here</a> ]]></description>
<pubDate>Sun, 01 Nov 2009 15:46:51 -0500</pubDate>
</item>
<item>
<title>install package for 2009 &#45; license and maintenance</title>
<link>http://www.rockryno.com/point-of-sale/install-package-for-2009-license-and-maintenance-39460-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/install-package-for-2009-license-and-maintenance-39460-.htm</guid>
<description><![CDATA[ Does the maintenance package from distributors have a Customer Source login  that is separate from the POS license itself physically?  I received a  license for POS but no download link or Customer Source login.  I will check  with my distributor on...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/install-package-for-2009-license-and-maintenance-39460-.htm">discuss here</a> ]]></description>
<pubDate>Sat, 31 Oct 2009 10:35:01 -0400</pubDate>
</item>
<item>
<title>Windows 7 &amp; SQL Server 2008 Standard Edition data Connectivi...</title>
<link>http://www.rockryno.com/point-of-sale/Windows-7-SQL-Server-2008-Standard-Edition-data-Connectivi-39459-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Windows-7-SQL-Server-2008-Standard-Edition-data-Connectivi-39459-.htm</guid>
<description><![CDATA[ Hi ,  I installed Windows 7 & SQL Server 2008 Standard Edition. RMS i am using Ver 2.0 SP3 When i try to connect my databse server through Store Operation Administrator  Application shows the following error Mesaage    To connect this server you mus...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Windows-7-SQL-Server-2008-Standard-Edition-data-Connectivi-39459-.htm">discuss here</a> ]]></description>
<pubDate>Sat, 31 Oct 2009 03:19:01 -0400</pubDate>
</item>
<item>
<title>Receipt XML &#45; Jeff</title>
<link>http://www.rockryno.com/point-of-sale/Receipt-XML-Jeff-39458-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Receipt-XML-Jeff-39458-.htm</guid>
<description><![CDATA[ I would like an extra claim receipt to be printed  if a workorder has been  issue with the ItemLookupCode Service.  I would print out an extra claim  slip with the our company name, Name of customer, barcode number of  workorder,  Comments and a sta...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Receipt-XML-Jeff-39458-.htm">discuss here</a> ]]></description>
<pubDate>Fri, 30 Oct 2009 20:27:04 -0400</pubDate>
</item>
<item>
<title>Lost supplier tab info after manually adding items to a matr...</title>
<link>http://www.rockryno.com/point-of-sale/Lost-supplier-tab-info-after-manually-adding-items-to-a-matr-39457-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Lost-supplier-tab-info-after-manually-adding-items-to-a-matr-39457-.htm</guid>
<description><![CDATA[ We are taking existing items and putting them into a matrix. After doing so  the vendor and reorder info is gone from the supplier tab on the individual  items. We're using RMS 2.0 in an HQ environment.  Also, if running HQ PO's or  other reports th...The post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/Lost-supplier-tab-info-after-manually-adding-items-to-a-matr-39457-.htm">Start the discussion here</a> ]]></description>
<pubDate>Fri, 30 Oct 2009 19:28:01 -0400</pubDate>
</item>
<item>
<title>TaskPadHelper and POS 2009</title>
<link>http://www.rockryno.com/point-of-sale/TaskPadHelper-and-POS-2009-39454-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/TaskPadHelper-and-POS-2009-39454-.htm</guid>
<description><![CDATA[ Is there any way to get TaskPadHelper to overwrite an existing task pad  without prompting?  I have not found such a command switch in the docs, but  I'm sure it must be possible. I was planning on using TaskPadHelper to integrate POS 2009 with anot...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/TaskPadHelper-and-POS-2009-39454-.htm">discuss here</a> ]]></description>
<pubDate>Fri, 30 Oct 2009 16:39:01 -0400</pubDate>
</item>
<item>
<title>Voucher Questions in HQ environment </title>
<link>http://www.rockryno.com/point-of-sale/Voucher-Questions-in-HQ-environment-39434-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Voucher-Questions-in-HQ-environment-39434-.htm</guid>
<description><![CDATA[ How well do vouchers work in an HQ environment? Can you sell a voucher(Gift card) in Store1 and then redeem it in Store2? Does the Value and serial number information syncronize across all stores? Thanks, TomT ... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Voucher-Questions-in-HQ-environment-39434-.htm">discuss here</a> ]]></description>
<pubDate>Fri, 30 Oct 2009 10:04:19 -0400</pubDate>
</item>
<item>
<title>EBT &quot;Food Stamps&quot;</title>
<link>http://www.rockryno.com/point-of-sale/EBT-Food-Stamps-39431-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/EBT-Food-Stamps-39431-.htm</guid>
<description><![CDATA[ We primarily sell general merchandise however, we are trying to broaden our  customer base and have taken on the task of adding the required product in  order to accept food stamps (SNAP) EBT cards. Does anyone know if this can be integrated into RM...... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/EBT-Food-Stamps-39431-.htm">discuss here</a> ]]></description>
<pubDate>Thu, 29 Oct 2009 16:54:01 -0400</pubDate>
</item>
<item>
<title>cannot sync offline database</title>
<link>http://www.rockryno.com/point-of-sale/cannot-sync-offline-database-39429-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/cannot-sync-offline-database-39429-.htm</guid>
<description><![CDATA[ i get an error when i try to do a Z report when offline the error is Runtime error 2147217900 (80040e14): Cannot resolve collation conflict between 'Latin1_General_CI_AS' and  'SQL_Latin1_General_CI_AS' in the equal to opperation.... The post has 4 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/cannot-sync-offline-database-39429-.htm">discuss here</a> ]]></description>
<pubDate>Thu, 29 Oct 2009 16:00:01 -0400</pubDate>
</item>
<item>
<title>purchase order table Inquiry HELP</title>
<link>http://www.rockryno.com/point-of-sale/purchase-order-table-Inquiry-HELP-39424-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/purchase-order-table-Inquiry-HELP-39424-.htm</guid>
<description><![CDATA[ Hello here is my problem. I did some dummy transaction on the database that I  entered my Purchase orders (PO) in, After entering all of my PO's I then when  to Administrator- database-delete transaction, thinking as the prompt says  that it would d...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/purchase-order-table-Inquiry-HELP-39424-.htm">discuss here</a> ]]></description>
<pubDate>Thu, 29 Oct 2009 14:04:06 -0400</pubDate>
</item>
<item>
<title>Voucher Problems with PriceA,B,C</title>
<link>http://www.rockryno.com/point-of-sale/Voucher-Problems-with-PriceA-B-C-39420-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Voucher-Problems-with-PriceA-B-C-39420-.htm</guid>
<description><![CDATA[ I have a voucher set up that prompts the cashier for the Price. It works  fine for most customers, but when I try to sell one to a customer that has  Price Level A B or C the value of the voucher is what the cashier entered,  but the price is $0.00....... The post has 3 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Voucher-Problems-with-PriceA-B-C-39420-.htm">discuss here</a> ]]></description>
<pubDate>Thu, 29 Oct 2009 13:05:55 -0400</pubDate>
</item>
<item>
<title>RMS on a wireless network</title>
<link>http://www.rockryno.com/point-of-sale/RMS-on-a-wireless-network-39416-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/RMS-on-a-wireless-network-39416-.htm</guid>
<description><![CDATA[ I have a prospect who is planning on implementing RMS on a 3-register system,  but does not want to use a regular Ethernet wired network in their store  (small space, and don't want to have to run wires); they want to operate  using a wireless route...... The post has 6 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/RMS-on-a-wireless-network-39416-.htm">discuss here</a> ]]></description>
<pubDate>Thu, 29 Oct 2009 09:40:02 -0400</pubDate>
</item>
<item>
<title>pos 2009 vb.net get reference to tender types</title>
<link>http://www.rockryno.com/point-of-sale/pos-2009-vb-net-get-reference-to-tender-types-39415-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/pos-2009-vb-net-get-reference-to-tender-types-39415-.htm</guid>
<description><![CDATA[ Can anyone help me with this. I have created a addin for the new pos2009 but i need to see what tender type the user has paid with. Can someone help in pointing me in the right direction to get a reference to the payment types. Many thanks DaveThe post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/pos-2009-vb-net-get-reference-to-tender-types-39415-.htm">Start the discussion here</a> ]]></description>
<pubDate>Thu, 29 Oct 2009 08:55:25 -0400</pubDate>
</item>
<item>
<title>Purchase Order automatic number sequence</title>
<link>http://www.rockryno.com/point-of-sale/Purchase-Order-automatic-number-sequence-39411-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Purchase-Order-automatic-number-sequence-39411-.htm</guid>
<description><![CDATA[ Somehow one of my employees has inadvertantly change the sequence of the  automated purchase order numbers.  The sequence matches too closely with  another locations number sequence.  How can I alter or set a new number  sequence to stop this.   -- ...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Purchase-Order-automatic-number-sequence-39411-.htm">discuss here</a> ]]></description>
<pubDate>Wed, 28 Oct 2009 17:17:01 -0400</pubDate>
</item>
<item>
<title>error 3711</title>
<link>http://www.rockryno.com/point-of-sale/error-3711-39410-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/error-3711-39410-.htm</guid>
<description><![CDATA[ i have a client running their database on a xp sp3 machine, when they enter  POs the system would give this error #3711. it happens at randon and not a  any specific point during the PO process.... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/error-3711-39410-.htm">discuss here</a> ]]></description>
<pubDate>Wed, 28 Oct 2009 15:07:01 -0400</pubDate>
</item>
<item>
<title>New RMS License Keys</title>
<link>http://www.rockryno.com/point-of-sale/New-RMS-License-Keys-39408-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/New-RMS-License-Keys-39408-.htm</guid>
<description><![CDATA[ Does anyone know how to enter RMS license keys on a machine that had RMS  Store Operations installed and licensed then uninstalled and finally is  having RMS installed again but needs to have new product (license) keys  installed.  During the instal...... The post has 3 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/New-RMS-License-Keys-39408-.htm">discuss here</a> ]]></description>
<pubDate>Wed, 28 Oct 2009 14:33:02 -0400</pubDate>
</item>
<item>
<title>RMS 2.0 Windows 7</title>
<link>http://www.rockryno.com/point-of-sale/RMS-2-0-Windows-7-39407-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/RMS-2-0-Windows-7-39407-.htm</guid>
<description><![CDATA[ Does RMS 2.0 have any compatability issues with Window 7? --  Akim... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/RMS-2-0-Windows-7-39407-.htm">discuss here</a> ]]></description>
<pubDate>Wed, 28 Oct 2009 12:05:01 -0400</pubDate>
</item>
<item>
<title>what scales are certified and working for POS 2009&#63;</title>
<link>http://www.rockryno.com/point-of-sale/what-scales-are-certified-and-working-for-POS-2009-39405-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/what-scales-are-certified-and-working-for-POS-2009-39405-.htm</guid>
<description><![CDATA[ Please be as specific as possible with model numbers that have been tested  and comm type (i.e. serial {comm settings?}, usb, etc).  Any additional info  that might help would be appreciated. Thank youThe post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/what-scales-are-certified-and-working-for-POS-2009-39405-.htm">Start the discussion here</a> ]]></description>
<pubDate>Wed, 28 Oct 2009 08:26:09 -0400</pubDate>
</item>
<item>
<title>MS RMS 2.0 MULTI STORE.</title>
<link>http://www.rockryno.com/point-of-sale/MS-RMS-2-0-MULTI-STORE-39403-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/MS-RMS-2-0-MULTI-STORE-39403-.htm</guid>
<description><![CDATA[ Hello everybody, Our company is looking into MS RMS for three stores. I have not been able to  find if all stores will be able to check each other's inventory from POS  screen. Any input will be appriciated.... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/MS-RMS-2-0-MULTI-STORE-39403-.htm">discuss here</a> ]]></description>
<pubDate>Wed, 28 Oct 2009 00:59:01 -0400</pubDate>
</item>
<item>
<title>Tax based on item cost</title>
<link>http://www.rockryno.com/point-of-sale/Tax-based-on-item-cost-39402-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Tax-based-on-item-cost-39402-.htm</guid>
<description><![CDATA[ Is it possible in RMS Store Operations to setup a Use tax that is based on  the item's cost not the selling price?  If this is not possible in  RMS does  anyone know of a 3rd party ISV that currently adds that functionality? Thanks!... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Tax-based-on-item-cost-39402-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 27 Oct 2009 19:04:01 -0400</pubDate>
</item>
<item>
<title>Customize report &#45; Card transaction detail report</title>
<link>http://www.rockryno.com/point-of-sale/Customize-report-Card-transaction-detail-report-39401-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Customize-report-Card-transaction-detail-report-39401-.htm</guid>
<description><![CDATA[ Hello Everyone. I am using RMS 2.0. I am trying to get card transaction detail report from system but I dont think this program has it. I need user report showing information in 'tenderentry' table + card type( if possible) How can I create the repo...... The post has 3 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Customize-report-Card-transaction-detail-report-39401-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 27 Oct 2009 17:10:00 -0400</pubDate>
</item>
<item>
<title>POS 2009 &#45; No Capabilities to Add Serial Numbered Items</title>
<link>http://www.rockryno.com/point-of-sale/POS-2009-No-Capabilities-to-Add-Serial-Numbered-Items-39397-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/POS-2009-No-Capabilities-to-Add-Serial-Numbered-Items-39397-.htm</guid>
<description><![CDATA[ Hi, I have a few clients and a an existing client that are interested in  upgrading or buying Microsoft Dynamics POS 2009. However there is a fundamental problem as a feature that was available for  RMS2.0 was now removed. In RMS2.0 you could use an...... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/POS-2009-No-Capabilities-to-Add-Serial-Numbered-Items-39397-.htm">discuss here</a> ]]></description>
<pubDate>Tue, 27 Oct 2009 11:20:09 -0400</pubDate>
</item>
<item>
<title>POS 2009 with SQL Server on Domain Controller</title>
<link>http://www.rockryno.com/point-of-sale/POS-2009-with-SQL-Server-on-Domain-Controller-39395-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/POS-2009-with-SQL-Server-on-Domain-Controller-39395-.htm</guid>
<description><![CDATA[ Hello, In preparation for a POS 2009 installation, I have been doing some tests to  make sure the product will work in our environment.  I would like to have the  primary POS database on our Small Business Server 2008 machine.  I don't have  a SBS m...The post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/POS-2009-with-SQL-Server-on-Domain-Controller-39395-.htm">Start the discussion here</a> ]]></description>
<pubDate>Tue, 27 Oct 2009 03:19:01 -0400</pubDate>
</item>
<item>
<title>Purchase Orders copying &#40;URGENT HELP PLEASE&#41;</title>
<link>http://www.rockryno.com/point-of-sale/Purchase-Orders-copying-URGENT-HELP-PLEASE-39391-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Purchase-Orders-copying-URGENT-HELP-PLEASE-39391-.htm</guid>
<description><![CDATA[ Can the purchase orders from one database be copied to the new live database. One of my customers had a database with several purchase order and now he  has created a new database but he want his purchase orders to come over tot  he new database.The post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/Purchase-Orders-copying-URGENT-HELP-PLEASE-39391-.htm">Start the discussion here</a> ]]></description>
<pubDate>Mon, 26 Oct 2009 15:14:19 -0400</pubDate>
</item>
<item>
<title>Web Integration</title>
<link>http://www.rockryno.com/point-of-sale/Web-Integration-39389-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Web-Integration-39389-.htm</guid>
<description><![CDATA[ Is anyone using a web integration solution with more than one site from the  same database other than the Kosmos solution? Bill Hobby Central... The post has 2 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Web-Integration-39389-.htm">discuss here</a> ]]></description>
<pubDate>Mon, 26 Oct 2009 12:25:01 -0400</pubDate>
</item>
<item>
<title>PO PLANNER &#40;Urgent Please&#41;</title>
<link>http://www.rockryno.com/point-of-sale/PO-PLANNER-Urgent-Please-39384-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/PO-PLANNER-Urgent-Please-39384-.htm</guid>
<description><![CDATA[ Hi,  We have 9 stores with HQ . we are following central purchase policy . We use to send PO Planners to the stores and the store supervisors will  receive the purchase orders and commit the received qty. after some connections between HQ and Stores...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/PO-PLANNER-Urgent-Please-39384-.htm">discuss here</a> ]]></description>
<pubDate>Mon, 26 Oct 2009 04:42:01 -0400</pubDate>
</item>
<item>
<title>Sub queries in Active Reports</title>
<link>http://www.rockryno.com/point-of-sale/Sub-queries-in-Active-Reports-39383-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/Sub-queries-in-Active-Reports-39383-.htm</guid>
<description><![CDATA[ I am trying to create a report that lists all the checks processed each day  which includes both purchases and payments.   I need to use a subquery to  make it happen.  The report complains with an error  TenderEntry.TransactionNumber could not be b...... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/Sub-queries-in-Active-Reports-39383-.htm">discuss here</a> ]]></description>
<pubDate>Sat, 24 Oct 2009 16:24:02 -0400</pubDate>
</item>
<item>
<title>1.3R upgrade msed to sql2k5</title>
<link>http://www.rockryno.com/point-of-sale/1-3R-upgrade-msed-to-sql2k5-39382-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/1-3R-upgrade-msed-to-sql2k5-39382-.htm</guid>
<description><![CDATA[ Upgrading a 1.3R with MSDE to 1.3R with SQL2k5 on WinXP PRO ... or I can put  the system on Vista 32 bit? Anything I should be aware of or watch for... or that i am missing. 1) download & install SQL2k5 2) install 1.3R and patches 3) restore DB copy...The post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/1-3R-upgrade-msed-to-sql2k5-39382-.htm">Start the discussion here</a> ]]></description>
<pubDate>Sat, 24 Oct 2009 14:26:55 -0400</pubDate>
</item>
<item>
<title>query to delete negative numbers in HQ</title>
<link>http://www.rockryno.com/point-of-sale/query-to-delete-negative-numbers-in-HQ-39381-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/query-to-delete-negative-numbers-in-HQ-39381-.htm</guid>
<description><![CDATA[ Hello all,    I have some negative items trapped in my HQ that are not in any of my  stores inventories. I believe this happened when the supplier was changed. Is  there a simple query to drop these negative numbers out of HQ?.... The post has 1 replies so far. Read more and <a href="http://www.rockryno.com/point-of-sale/query-to-delete-negative-numbers-in-HQ-39381-.htm">discuss here</a> ]]></description>
<pubDate>Sat, 24 Oct 2009 09:41:01 -0400</pubDate>
</item>
<item>
<title>2.0 &#45; Still have to print a WO to reset default printer</title>
<link>http://www.rockryno.com/point-of-sale/2-0-Still-have-to-print-a-WO-to-reset-default-printer-39374-.htm</link>
<guid isPermaLink="true">http://www.rockryno.com/point-of-sale/2-0-Still-have-to-print-a-WO-to-reset-default-printer-39374-.htm</guid>
<description><![CDATA[ One annoying problem in 1.3 was having to print a workorder to reset the default printer after viewing a transaction from POS lane with different printer. I thought 2.0 was supposed to fix this problem?The post does not have replies yet. <a href="http://www.rockryno.com/point-of-sale/2-0-Still-have-to-print-a-WO-to-reset-default-printer-39374-.htm">Start the discussion here</a> ]]></description>
<pubDate>Fri, 23 Oct 2009 17:21:38 -0400</pubDate>
</item>
</channel>
</rss>